Fume hood test vehicle that complies with ASHRAE110-2016 standards
 

Conducting ASHRAE110-2016 (AM, AI, AU) testing requires a series of hardware equipment and software.
 
The fume hood performance test vehicle manufactured by ICT2 is equipped with everything (hardware, software and training) needed to conduct ASHRAE110-2016 (AM, AI, AU) testing.
 
Test vehicle part: The ICT2 fume hood performance test vehicle was designed in cooperation with D-INDUSTRIAL. The ICT2 test vehicle contains: SF6 tracer gas analyzer Q200, data acquisition terminal, high-purity sulfur hexafluoride tracer gas and pressure reducing valve, sulfur hexafluoride releaser, TSI wind speed converter, large smoke releaser, Small smoke release device, test dummy and support frame, data recorder, support frame and fixed clamp, etc.
 
Test software part: ICT2 and D-INDUSTRIAL Company developed a rapid intelligent test software system based on the requirements of ASHRAE-2016 and the test vehicle hardware part. The main purpose is to apply the data collected by the tracer gas analyzer Q200 and the integrated wind box to the detection report more completely.
 
Training component: Training is a necessary component for proper testing, so each test vehicle is provided with two days of on-site training to ensure you can use it correctly.


ASHRAE 110 Fume Hood performance Test Kit
 


ASHRAE 110 Test Kit (Fume Hood performance Test Kit)
 
Conducting EN14175-2019 (AM, AI, AU) testing requires a series of hardware equipment and software. The fume hood performance test vehicle manufactured by ICT2 is equipped with everything (hardware, software and training) needed to conduct EN14175-2019 (AM, AI, AU) testing.
 
Test vehicle part: The ICT2 fume hood performance test vehicle was designed in cooperation with D-INDUSTRIAL. It is completely manufactured in accordance with the requirements of the new EN14175-2019 standard. The ICT2 test vehicle contains: SF6 tracer gas analyzer Q200, data acquisition terminal, high-purity sulfur hexafluoride tracer gas and pressure reducing valve, sulfur hexafluoride Release components, TSI wind speed converters, programmable square mobile tablets, large smoke releasers, small smoke releasers, inner plane test components, outer plane test components, data loggers, adoption pumps, etc.
 
Test software part: ICT2 and D-INDUSTRIAL company developed an intelligent test software system based on the requirements of EN14175-2019 and the test vehicle hardware part. The main purpose is to apply the data collected by the tracer gas analyzer Q200 and the integrated wind box to the detection report more completely.


EN 14175 Fume Hood performance Test Kit
 

Service Content


ICT2 and D-INDUSTRIAL jointly developed and manufactured fume hood performance test vehicle, to provide testers with a complete test suite, which contains all the hardware, software and all the training you need, it can perform ASHRAE 110, EN 14175, Everything you need for JB/T 6412-1999 and JG/T 222-2007 testing hardware. ICT2 can provide certification services for testers, allowing you to become a certified fume hood tester.

Training component: Training is a necessary component for proper testing, so each test vehicle is provided with two days of on-site training to ensure you can use it correctly.

Tel E-mail WeChat Top

Official QR code

Hotline
400 666 9939